01 · PRESSURE

Small pads can concentrate pressure more easily

When the contact area is small, the same front load can be transferred through a narrower part of the nose.

With a heavier frame front, marks or pressure may therefore feel stronger.

A small pad can localize the contact point precisely, but pressure may increase if the front load is carried by too little area. Whether a small pad is uncomfortable therefore depends on front weight, nasal shape and actual contact area rather than size alone.

02 · DISTRIBUTION

Larger pads can help spread load

A larger pad that actually matches the nose can support the frame over a broader area and help distribute pressure.

If the pad does not make broad contact, however, simply increasing size offers little benefit.

The benefit of a larger pad appears only when its larger surface really matches the nose. If curvature or angle is wrong, even a large pad may touch mainly at one edge, so more nominal area does not automatically mean better pressure distribution.

03 · FIT

Matching the nose matters more than size alone

A large pad can still contact only at one edge if its slope or curvature does not suit the nose.

A small pad can be comfortable when it fits well and the front load is modest.

The amount of usable contact space on the nose also matters. An oversized pad can interfere with adjacent parts of the bridge or nasal surface, while an undersized pad may not support the frame stably at the intended location. Shape and position should be selected together.

04 · APPEARANCE

There is also a design difference

Smaller pads are less visible and can keep the frame looking lighter.

Larger pads are more noticeable but may be chosen when comfort and pressure distribution are higher priorities.

05 · WEARING HEIGHT

Changing pad size can change frame position

A different pad can also differ in thickness and mounting geometry, changing where the frame is supported on the nose.

After replacement, recheck wearing height, vertex distance and left-right contact.

A replacement pad with a different thickness or mounting height can subtly change wearing height and vertex distance. Even parts sold as the same size can differ in real shape, so check bilateral contact and lens position again after replacement.

SOLUTION GUIDE

Solutions at a glance

The frame is light and there is no pressure

Small pads may be perfectly adequate.

The front load is high and marks are deep

A broader pad may be considered.

Large pads still hurt

Check angle, curvature and real contact area.

Frame height changed after replacement

Recheck wearing height and vertex distance.

GLANOS FITTING CHECK

GLANOS fitting check order

  1. Front
    Check alignment.
  2. Nose pads
    Check size, thickness, angle and contact.
  3. Width
    Check side support.
  4. Temple bend
    Stabilize the final wearing position.

CAUTION

Large pads are not a universal solution

If the pad does not match the nose, increasing its size will not remove the problem. Choose based on real contact and the load of the frame.

GLANOS EYEWEAR

There is a reason glasses feel uncomfortable.

CATEGORYNose pads
TOPICNose-pad size
FRAMEMetal frame
TAGSGLANOS EYEWEAR

nose-pad size · metal glasses · nose marks · nose pain · pad replacement · eyewear fitting