Key point first

The same marked bridge number does not describe the full three-dimensional contact geometry of the bridge, so differences in height, inner curvature, thickness and frame position can produce very different comfort.

01 · BRIDGE NUMBER

The number does not describe the whole bridge shape

The bridge size in a conventional frame marking is generally based on the boxing-system DBL, or distance between lenses.

That one number does not tell you the actual internal width, height, curvature or contact depth where the nose meets the frame.

The same marked number can therefore produce a different nose fit.

02 · BRIDGE HEIGHT

Bridge height and position can differ even at the same marked size

One frame may place the internal bridge contact higher while another places it lower.

That changes where the frame sits on the nose and the position of the lenses in front of the eyes.

03 · INNER CURVE

The inner nose-contact surface can be completely different

Differences in roundness, flatness and side slope change the true contact area.

One frame may support broadly while another touches mainly at an edge.

04 · FRAME THICKNESS

Bridge and front thickness also affect facial clearance

The thickness and projection of the inner bridge, along with front thickness and lens placement, can change the lens-to-face distance.

This is one reason lash or cheek interference can differ despite the same bridge number.

05 · FRAME POSITION

Temple geometry and front tilt change the result too

Even with similar bridge geometry, temple direction, pantoscopic tilt and overall front alignment can change the final wearing position.

The completed fit matters more than the bridge number alone.

SOLUTION GUIDE

Solutions at a glance

Bridge height

Check where the frame actually sits on the nose.

Inner curvature

Check how it matches the nose slope.

Real contact area

Look for edge pressure.

Frame thickness

Check lens-to-face distance.

Wearing height and pantoscopic tilt

Check lens position and overall balance.

GLANOS FITTING CHECK

GLANOS fitting check order

  1. Front
    Check frame alignment.
  2. Bridge
    Judge actual contact rather than the printed number.
  3. Width
    Check side support.
  4. Temple bend
    Finalize the wearing position.

CAUTION

Do not buy a different model online simply because the bridge number matches your old glasses

Different brands and models can have very different internal bridge shapes and frame positions despite the same marking. Review detailed measurements and likely wearing geometry when possible.

GLANOS EYEWEAR

There is a reason glasses feel uncomfortable.

CATEGORYBridge / Frame selection
TOPICBridge size
FRAMEPlastic / acetate frame
TAGSGLANOS EYEWEAR

bridge size · plastic glasses · frame size · acetate · frame selection · eyewear fitting