Nose-pad position and material, frame width, temple fitting and lens weight work together. Because metal frames allow nose-pad adjustment or replacement, a careful fitting can often improve the problem.
Do you find yourself pushing your metal glasses back up several times a day?
It is easy to assume the frame is too large or that the bridge of your nose is low. In practice, slipping rarely has just one cause.
Nose-pad position and material, frame width, temple fitting and lens weight work together. Because metal frames allow nose-pad adjustment or replacement, a careful fitting can often improve the problem.
01 · NOSE PAD
Start by checking the nose pads
Every face has a different nose width, height and angle. The pads need their own correct position and angle for each wearer.
If only part of a pad touches the skin, or one side floats, the frame cannot distribute its weight securely.
Rather than simply narrowing the pads, adjust their spacing, height and angle so both pads meet the nose naturally.
02 · MATERIAL
If metal nose pads feel slippery
Material matters as much as shape. Smooth or metal pads can feel more slippery for some people, especially in warm weather when sweat and skin oil increase.
Changing to silicone pads may help: they tend to have more grip and a softer contact. It is not universal, however; skin condition, nose shape and frame construction should all be considered.
03 · REPLACEMENT
Older nose pads may need replacement
Nose pads are wearable parts. With time they can harden, discolour and become more slippery.
If a frame that used to fit well has recently started sliding, check the pads themselves. Replacing them can sometimes be simpler than further adjustment.
04 · FRAME WIDTH
Check the overall frame width
Glasses are not supported by the nose pads alone. If the frame is too wide, the temples cannot support the sides of the face and the entire frame can move loosely.
If it is too narrow, it can press on the temples. The aim is balanced support, not a tight squeeze.
05 · TEMPLE BEND
Temple bend also matters
The ends of the temples help prevent the frame from moving forward behind the ears.
A bend that starts too late may not hold the frame; one that starts too early or presses too firmly can cause pain behind the ear. Temples may also spread or change shape over time.
06 · LENS WEIGHT
Lens weight can make glasses slide
Lens size, prescription and material change the weight at the front of the frame.
Larger or heavier lenses shift the centre of gravity forward. In this case, check the frame width, temples and behind-the-ear fit together—not only the nose pads.
SOLUTION GUIDE
A quick guide
Adjust their spacing and angle for the face.
Consider silicone pads.
Replace them.
Check frame width and temple condition.
Check the temple bend.
Review the overall fitting balance.
GLANOS FITTING CHECK
GLANOS fitting check order
- Front alignment
Make sure the frame itself is level and not twisted. - Nose-pad contact
Confirm both pads meet the nose securely and evenly. - Frame width
Check for balanced support without excessive pressure. - Temple bend
Confirm the temples curve naturally behind the ears.
CAUTION
Do not simply tighten everything
Narrowing the pads or tightening the temples too much can leave marks and cause pressure or pain. Good fitting is not about making glasses tight. Check the front, nose pads, frame width and temple bend in that order, then adjust only what is needed.
GLANOS EYEWEAR
There is a reason behind eyewear discomfort.
GLANOS EYEWEAR looks at everyday issues in frames, fitting and lenses, and explains practical ways to understand them.